Vacuuming Dry Materials; Vacuuming Liquids; Emptying The Drum - RIDGID WD1250 Manual Del Operador

SP6663-2 12 GALLON.qxd
Operation (continued)
Familiarize yourself with the accessories
included with the vac. Each accessory may
be used in various ways for vacuuming
and blowing debris. Here is a list of the
accessories and their uses.
Utility Nozzle - General purpose nozzle for
most vacuuming applications.
Car Nozzle - Dry pickup nozzle for car
interiors and most upholstery cleaning.
Wet Nozzle - Used for wet pickup on
smooth surfaces to pick up liquid and dry
the surface in one stroke.
Extension Wands - These wands can be
connected together and provides
additional length for more reach.
Hose - Provides transfer of vacuum or
blowing capability to work site. Provides
the means of attaching extension wands
and nozzles.
!
WARNING: To reduce the risk of
fire or electric shock, do not run vac
unattended.

Vacuuming Dry Materials

1. The filter must always be in correct
position at all times to avoid leaks and
possible damage to vac.
2. Your using your vac to pick up very fine
dust, it will be necessary for you to
empty the drum and clean the filter at
more frequent intervals to maintain
peak vac performance.
NOTE: A dry filter is necessary to pick up
dry material. If you use your vac to pick
up material when the filter is wet, the filter
will clog quickly and be very difficult to
clean.
3. If your filter is wet but you need to use
the vac to pick up dry material, you can
quickly dry the filter by running the vac
without hose attached for about
10 minutes. The clean air rushing
through the vac will help dry the filter.
4/21/08 10:40 AM

Vacuuming Liquids

1. When picking up small amounts of
2. When picking up large amounts of
3. When the liquid in the drum reaches a
4. After using the vac to pick up liquids, the
IMPORTANT: To reduce the risk of
damage to the vac, do not run motor with
float in raised position.

Emptying the Drum

1. The vac comes equipped with a drain
2. Another option is to remove the lid. Pull
3. While holding the latches out, lift the
4. Lay top assembly upside down on a
8
Page 8
liquid the filter may be left in place.
liquid we recommend that the filter be
removed. If the filter is not removed, it
will become saturated and misting may
appear in the exhaust.
predetermined level, the float
mechanism will rise automatically to cut
off air-flow. You will know that the float
has risen because vac airflow ceases
and the motor noise will become higher
in pitch, due to increased motor speed.
When this happens, turn off the vac,
unplug the power cord, and empty the
drum.
filter must be dried to avoid possible
mildew and damage to the filter.
!
WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before emptying
the drum.
for easy emptying of liquids. Simply
unscrew the drain cap and lift the
opposite side slightly to empty the
drum.
the flexible latches outward on each
side of the lid to release from the drum.
top assembly up and away from the
drum.
clean area while emptying drum or
changing filter.