Getting Started; The Smart Magnetic Attachment System - Crosscall CORE-X4 Manual Del Usuario

GETTING STARTED

Installing the sim card
1. Check that your device is turned off
If not, turn the power off by pressing the On/Off button
2. Open the SIM tray using the SIM eject tool provided
a.Take the tool provided
b.Insert it into the hole, as shown below, to eject the SIM tray from its housing.
3. Pull out the tray completely with the metal side facing upwards
4. Insert the SIM cards
a. Insert the SIM card, face down, in the smallest compartment
b. If you wish, insert a second SIM card (or an SD card up to 512 GB), face down, in the
biggest compartment.
sim 2 sim 1
5. Insert the tray back in the phone
a.Check that the cards are properly aligned.
b.Check that the tray is properly aligned with the slot in the phone when you insert it.
c.Insert the tray and push it in, as indicated below.
Please note:To ensure that your smartphone is watertight, make sure that the tray is
completely inserted and locked.
SWITCHING THE PHONE ON AND OFF
sim 1
micro sd
sim 2 sim 1
42
1. Press this button to turn on or lock the screen.
2. Press and hold this button to turn the device on and off.
3. Simultaneously press this button and the Volume «-» button to take a screenshot.
Switching on the phone
Press and hold the on/off button and wait a few seconds until the display turns on.
When you switch on your phone for the first time or after performing a data reset, follow
the on-screen instructions to set up your device.
Switching off the phone
Hold down the on/off button until the pop-up menu appears, then select
THE STRENGTHS OF THE CORE-X4
X-LINK
TM*

THE SMART MAGNETIC ATTACHMENT SYSTEM

This magnetic connector on the back of your smartphone can be used to attach and
connect your smartphone to exclusive X-LINK
This connector can be used for charging (2A) and/or data transfer using the OTG (On The
Go) feature (once attached to the compatible accessories)
X-BLOCKER
In situations that require maximum hold, this exclusive accessory supplied with your
CORE-X4 guarantees that your smartphone will be securely attached to compatible
accessories. It is easily attached to the slots on the side of your mobile. The siliconised
coating reduces vibrations caused by shocks.
Before starting any activity, check that the X-Blocker is perfectly engaged in both slots
of the phone
Discover the full range of accessories compatible with the X-LINK
www.crosscall.com
*by Magconn Technology
to turn it off.
TM* accessories.
TM* and X-BLOCKER on
43