How It Works; Setting Up The System - Unisar TV Listener K4 TV865 Manual De Instrucciones

How It Works

The TV Listener K4 works just like your remote control, sending an invisible infrared
signal from your television or any other audio device to the headset. Unlike radio fre-
quency devices, infrared is not subject to interference from cordless phones, wireless
networks, microwaves, etc. You adjust the volume on the wireless, lightweight headset
to suit your personal needs. Multiple headsets can be used with one transmitter.

Setting Up the System

Charge the batteries in the headset for 8 hours prior to first use.
TV Listener K4 Components
Check that you have all the following components before installation.
Transmitter
(connects to your TV or other audio device)
Charging
Indicator Light
Infrared Rays
Front
Wireless Headset
Ear Pieces
Power
Power Switch
Indicator
Light
Infrared
Sensors
Front
{ }
4
Charging
Base
Headphone
Adapter
AC Adapter Jack
Back
Left Right
Volume Volume
Control Control
Back
AC adapter
Installation of the Transmitter
The following are the two different ways to connect the TV Listener K4. Your installation
will depend on the type of equipment you have.
1. STEREO INSTALLATION
sions, DVD players, cable boxes). Refer to Pg. 6.
2. SMALL HEADPHONE JACK INSTALLATION
jack (most CD players, portable stereos, MP3 players). Refer to Pg. 7.
Battery
Compartment
2 AAA rechargeable batteries
RCA 3.5mm stereo adapter
– for equipment with two audio output jacks (stereo televi-
– for equipment with a small headphone
AAA battery
AAA battery
{ }
5