Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
23 / EN
III.- INCLUDED ACCESSORIES
No.
Description
1
SCREWS
2
WALL PLUGS
IV. - INSTALLING YOUR HEATER
HEATER LOCATION:
For optimal performance, place the heater as close as possible to the points of use (we
recommend not more than a 5 meter distance). This will minimize the loss of heat and
provide hot water quickly at the point of use.
•
This heater must be installed horizontally, with the connections facing downward
for it to operate properly. When the installation is finished and before filling it with
water and switching on the power supply, make sure it is effectively horizontally
mounted, using a testing instrument (such as a bubble level). (See Figure 2)
•
Install your heater so that the control panel is not obstructed, to facilitate operation
and maintenance. Leave a free space of at least 50 cm for access to the electrical
parts.
•
The water heater's location should be as practical as possible, near the areas
where hot water is used in order to avoid heat loss or freezing in areas of extreme
cold.
Quantity
4
4
1
1
2
2
Publicidad
Tabla de contenido
