Descargar Imprimir esta página

Sun Microsystems Enterprise 250 Manual De Montaje página 32

Ocultar thumbs Ver también para Enterprise 250:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

6. Secure the chassis stop bracket to the left-side vertical rail at the front of the rack.
Use two #10 SEMS panhead screws.
7. Raise the leveling pads and retract the enclosure's stabilizer legs, if applicable.
See the instructions provided with the rack enclosure.
8. Connect the server's AC power cord to the rack's power sequencer.
See the instructions provided with the rack enclosure.
9. Connect all necessary cables to the server rear panel.
Route and manage the cables within the rack cabinet according to instructions
supplied with the rack enclosure.
10. Replace the enclosure front and rear panels, if applicable. If you are using a Sun
Enterprise Expansion Cabinet, do not reinstall the front door panel.
This completes the procedures for rackmounting a Sun Enterprise 250 server.
How to Rackmount the Sun Enterprise 250 Server 1-27

Publicidad

loading