Palazzetti ECOFIRE JACKIE IDRO Manual De Instalación Y Mantenimiento página 50

6.2.2 Connection to an external thermostat
An external thermostat can be
connected to the stove which turns
the stove on and off according to the
set temperature.
When the temperature is satisfied
the thermostat opens the circuit then
turns off the stove.
The external thermostat must be
connected to the two terminals on
the rear of the stove and is factory-
fitted with a probe. Disconnect the
probe and connect the two thermostat
contacts (Fig. 6.2.2).
It is important to set the stove in
configuration 1 following the in-
structions in the "Initial configura-
tion" paragraph.
After installing the thermostat, the
stove must be switched on manually
while the thermostat is in the "call"
state. This operation is also necessary
in the event of a power failure or if the
stove is switched off manually.
T o avoid overlapping of operating time
bands, it is advisable to deactivate
the stove timer by setting it to OFF.
50
1
004778021 - 10/01/2020 - PN - Italy
6 1
20.3
6
Fig. 6.2.2