Using The Radio - ION Plunge Max Guia De Inicio Rapido

Using the Radio

Selecting a Radio Station:
1. Press the FM button.
2. Select a radio station using the </> buttons.
Saving a Preset:
1. Press the FM button to choose FM Radio. The FM LED will illuminate solid green.
2. Press and release the << or >> buttons to select a FM radio station that you want to save as a preset.
A voice prompt will be heard identifying the selected station.
3. Press and hold the FM button for 3 seconds to enter Preset Creation mode.
4. Press and release the << or >> buttons to select from one of the 6 preset locations. For each button
press of << or >>, the unit will say the active preset number (for example, "two"). Once the desired save
location is reached, press and release the FM button to save the station preset. The FM LED will show
3 quick green flashes to confirm a preset is saved and then exit Preset Save mode and return to FM
mode.
Selecting a Preset:
To select from the 6 Preset stations, press and release Play/Pause in FM radio mode. The tuner will jump to
the next preset location and say the name of the preset location (for example, "three"), and resume playing the
FM station audio.
Note: When audio tones are playing, the FM signal will be temporarily muted.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce the overall
volume of Plunge Max.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level.
This will allow you to play the music louder before clipping (distortion) occurs.
8