Introduction; Features; Accessories; Carton Inventory - LiftMaster KPR2000 Manual Del Usuario

INSTALLATION

The LiftMaster KPR2000 is a single entry multi-function Access Controller with integrated keypad and card reader. It is designed and manufactured to
perform in a wide range of indoor, outdoor, and harsh environments.
The KPR2000 supports up to 2000 users in multiple access configurations (Card Only, Card or PIN, or Card + PIN). The built in 125 KHz card reader
supports HID 26 bit Wiegand and 30 bit Sentex Wiegand proximity card formats. The KPR2000 offers advanced programming features like; block
enrollment, advanced relay programming, and Panic PINs/Cards (which open the entry and set off the alarm).

Features

• Waterproof (IP68) (meets or exceeds N4)
• Vandal Resistant Enclosure
• Backlit Keypad
• Multi-color LED status display
• Integrated Alarm Buzzer & Output
• One Programmable Relay Output
• Stand Alone or Pass-Through Operation
• 2000 Users (Card/PIN/Card+PIN)
• Low power consumption (50mA)
• Anti-Tamper Alarm
• Latch Mode to hold door or gate open
• Two Keypad Operating Modes

Accessories

• Model PED42 Gooseneck Pedestal
• Model PED64 Gooseneck Pedestal
• Model PS12D2A 12 Vdc, 2 Amp Power Supply
• Model 142A0271 Decorative Trim Plate

Carton Inventory

NOT SHOWN: User's Manual
KPR2000
Keypad/Proximity Reader/Controller
Diode IN4007 (For Relay
circuit protection)
Manager Add Card
Self Tapping Screws #8 x 1"
Wall Anchors #6 x 1 1/8" Manager Delete Card
Security Screwdriver
(T-10 Security Torx Driver)
Specifi cations
User Capacity . . . . . . . . . . . . . . . . .2000 User ID's with card and/or PINS
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ~ 24 Vdc
Idle Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ~ 50mA
Active Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ~ 80mA
Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Key (3x4)
Two output formats: 26 bit Wiegand Card keypad mode
8 bit ASCII keypad mode
Proximity Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HID 26 bit
Radio Technology . . . . . . 125 KHz Industry Standard Proximity Card
Read Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 inch - 2.5 inches
Wiring Connections . . . . . . . . . . . . . . . . Relay Output, REX, DOTL, Alarm,
Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .One (NO, NC, Common)
Adjustable Relay Output Time . . 1 ~ 99 Seconds (5 seconds default)
Adjustable Auxiliary Alarm Output Time . . . 0 ~ 3 Minutes (1 minute
Lock Output Load . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Amp Maximum
Auxiliary Alarm Output Load . . . . . . . . . . . . . . . . . 10 Amp Maximum
Wiegand Interface . . . .HID Wiegand 26 and 30 bit Format Input & Output
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Meets or exceeds IP68
Operating Temperature . . . . . . . . . . . .-20°C ~ 60°C, or -4°F ~ 140°F
Operating Humidity . . . . . . . . . . . . . . . 10% ~ 90% Non-Condensing
Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zinc-Alloy Enclosure
Surface Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Powder Coat
Dimensions . . . . . . . . . . . . . . . . . . . L:128mm x W:82mm x D:28mm
Unit Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Pound
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.4 Pounds

One Year Limited Warranty

LiftMaster warrants to the first consumer purchaser of this product that it
is free from defect in materials and/or workmanship for a period of 1 year
from the date of purchase.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
2
and 30 bit (Sentex)
Wiegand (in/out)
default)