Location; Included - Sharp CV10CTXB Manual De Instalación Y Funcionamiento

LOCATION

•
The unit should be placed on a firm foundation to minimize
noise and vibration. For safe and secure positioning, place
the unit on a smooth, level floor strong enough to support
the unit.
• The unit has casters to aid placement, but it should only be
rolled on smooth, flat surfaces. Use caution when rolling on
carpet surfaces. Do not attempt to roll the unit over objects.
• The unit must be placed within reach of a properly rated
grounded socket.
• Never place any obstacles around the air inlet or outlet of the
unit.
• Allow at least 12" (30cm) of space from the wall for efficient
air-conditioning.

INCLUDED

Window Exhaust Adapter A
Exhaust
cover
Window
panel
Foam seal B
(adhesive type)
H o e s C a l m p
SUGGESTED TOOLS FOR WINDOW PANEL INSTALLATION
1. Screw driver (medium size Phillips)
4. Saw (In the event that the window panel needs to be cut down in size because the window is too
narrow for direct installation.)
Exhaust Hose
Adjustment
panel
Rain guard (2)
Screw (8) Bracket
Hose clip (2) R u b b r e
2. Tape measure or ruler
MIN.12"
(30cm)
Window Exhaust Adapter
Insect guard net
Power cord
hook (2)
p u l g Remote control
3. Knife or scissors
EN-7
MIN.12"
(30cm)
MIN.12"
(30cm)
Extension panel
Foam seal A
Drain hose
Battery (2)
Manual
(AAA.1.5V)