Amate Audio G7 Manual De Usuario página 8

G7

Fix the part "B" of SP-6N bracket using the DIN7380 M4 x 20
screws and 4 mm washers that you will find in the kit

Place the SP-6N bracket (part "A") in front of the mounting surface,
so you can mark the locations of the four mounting holes
Amate Audio
July2020 G7

Drill some corresponding pilot holes on the wall and fix the bracket
using the wall plugs and the four DIN7505B 5 x 30 screws that you
will find in the kit

Join the two parts of the bracket (A & B), placing the point "1" to
"2" or "3" position (depending on the desired angle of inclination)
Amate Audio
July2020