Setting The Alarm Time; Setting The Alarm Source; Setting The Alarm Volume; Setting The Alarm Repeat Frequency - Sonoro SO-310 Instrucciones De Manejo

The alarm functions can also be set if the device is in
Standby mode.
The Alarm Setup menu is structured as follows:
'Set alarm time è Set alarm source
è Set alarm volume
è Set the alarm repeat frequency è End'
i
If you do not enter any information for approx. 10
seconds when setting the alarm, the setting is ter‐
minated without being saved.
9.1

Setting the alarm time

Fig. 24: Setting Alarm 1
1. Keep the [Alarm 1] or [Alarm 2] button pressed.
ð The display shows the [Set Alarm 1 Time]
(Fig. 24) or [Set Alarm 2 Time] menu.
2. Turn the click wheel to set the hours.
3. Press the click wheel to confirm your choice.
ð The minutes display will flash.
4. Turn the click wheel to set the minutes.
5. Press the click wheel to confirm your choice.
i
Use the [Next] or [Previous] buttons to toggle
between the hours and minutes display.
ð The alarm time is set.
9.2

Setting the alarm source

After you have set and confirmed the alarm time, you
can choose the alarm source (Fig. 25).
Fig. 25: Setting the alarm source
1. Turn the click wheel to select the desired
source:
© 2013
FM Select an FM station preset from
the station memory that you
want to use for the alarm.
DAB Select a DAB station preset from
the station memory that you
want to use for the alarm.
CD Select a track from the CD that
you want to use for the alarm.
Relax Music Select a Relax Music sound from
the memory that you want to
use for the alarm.
Ringtone Select a ringtone from the
memory that you want to use
for the alarm.
2. Press the click wheel or the [OK] button on the
remote control to confirm the setting.
ð The alarm source is set.
9.3

Setting the alarm volume

After you have set and confirmed the alarm source,
you can choose the alarm volume (Fig. 26).
Fig. 26: Setting the alarm volume
1. Turn the click wheel to select the desired
volume.
2. Press the click wheel or the [OK] button on the
remote control to confirm the setting.
ð The alarm volume is set.
i
The alarm audio playback always starts with the
minimum volume and gradually increases to the
specified volume level.
9.4

Setting the alarm repeat frequency

After you have set and confirmed the alarm volume,
you can choose the alarm repeat frequency (Fig. 27).
57