Switching The Alarm Function On/Off; Switching Off The Alarm Clock After The Alarm Sounds; Setting The Snooze Function; General Audio Playback Functions - Sonoro SO-310 Instrucciones De Manejo

Fig. 27: Setting the alarm repeat frequency
1. Turn the click wheel to select the desired Snooze
setting. You can choose one of the following set-
tings:
n once
n daily
n weekends
n weekdays
2. Press the click wheel or the [OK] button on the
remote control to confirm the setting.
ð The alarm repeat frequency function is set.
Switching the alarm function on/
9.5
off
Switching the alarm function on
1. To switch on the alarm clock, briefly press the
[Alarm 1] or [Alarm 2] button on the front of the
device or the remote control.
Switching the alarm function off
2. To switch off the alarm clock, briefly press the
[Alarm 1] or [Alarm 2] button again.
Switching off the alarm clock after
9.6
the alarm sounds
1. To switch off the alarm, press one of the fol-
lowing buttons:
n [Alarm 1]
n [Alarm 2]
n Click wheel
n [Standby]
ð The alarm will remain activated for the next
day. The only exception to this is the non-
recurring alarm setting.
2. Press the [SNOOZE] button on the remote con-
trol to activate the Snooze function.
i
Alternatively, you can also turn the click
wheel when the alarm sounds to adjust the
desired snooze time and confirm it by
pressing the click wheel.
58
ð The remaining snooze time is displayed. The
alarm will sound again after the set time
expires.
9.7

Setting the Snooze function

Fig. 28: Setting the Snooze function
1. In Standby mode, briefly press the [SNOOZE]
button on the remote control. When the device
is switched on, press and hold the [SNOOZE]
button on the remote control until the Snooze
submenu appears (Fig. 28).
ð The display shows the [Snooze] symbol
(Fig. 28/1).
2. Turn the click wheel to set the snooze time.
3. Press the click wheel to confirm your choice.
General audio playback func-
10
tions
10.1

Selecting a playback mode

Select the desired mode for audio playback of the dif-
ferent media or from external devices.
Fig. 29: Selecting a playback mode
1. Switch on the sonoroSTEREO.
2. Press the [MODE] button on the front of the
device until the desired mode is shown, or select
it on the remote control.
i
Alternatively, you can also turn the click
wheel after pressing the [MODE] button to
toggle through the different modes. Press the
click wheel to confirm the mode.
ð The selected mode is displayed (Fig. 29).
© 2013