Replacing The Door Glass; Replacing The Heating Elements - Whirlpool POM4/PZ Manual De Instrucciones

Replacing the door glass

Remove the screws in the left side of the door and remove
it from the door frame.

Replacing the heating elements

Once the "Safety precautions" have been carried out, replace the heating elements as follows:
•
Remove the right side panel to replace the top's heating elements;
•
Disconnect the power supply wires for the heating elements being replaced;
•
Move the mineral wool aside to access the fixing screws or nuts of the heating elements being replaced;
•
Remove the faulty heating element and replace it with the new one;
•
Carry out the steps in reverse order for the reassembly.
•
Remove the right side panel to replace the bottom's heating elements;
•
Disconnect the power supply wires for the heating elements being replaced;
•
Move the mineral wool aside to access the fixing screws or nuts of the heating elements being replaced;
•
Remove the bottom's hollow tiles;
•
Remove the faulty heating element and replace it with the new one;
•
Reposition the hollow tiles and carry out the steps in reverse order for the reassembly.
Remove the front control panel without disconnecting the wires.
Insert a slotted screwdriver into the spring pin.
Loosen the nut that keeps the spring pin locked and turn the
screwdriver anticlockwise to release the spring.
Remove the inner door and replace the glass.
Carry out the steps in reverse order for the reassembly.
26