Wlan Internet Access Points - Nokia N96 Manual Del Usuario

of the access point groups, select an access point
marked with , and select Edit.
Follow the instructions from your service provider.
Select from the following:
Access point name
●
name from your service provider.
User name — The user name may be needed to
●
make a data connection, and is usually provided by
the service provider.
Prompt password
●
password every time you log in to a server, or if you
do not want to save your password in the device,
select Yes.
Password — A password may be needed to make
●
a data connection and is usually provided by the
service provider.
Authentication
●
your password encrypted or
password encrypted when possible.
Homepage — Depending on the access point you
●
are setting up, enter the web address or the address
of the multimedia message centre.
Select Options
>
following:
Network type
●
to transfer data to and from your device. The other
settings depend on the selected network type.
164
— You obtain the access point
— If you must enter the
— Select Secure to always send
Normal to send your
Advanced settings and from the
— Select the internet protocol type
Phone IP address (for IPv4 only) — Enter the IP
●
address of your device.
DNS addresses — Enter the IP addresses of the
●
primary and secondary DNS servers, if required by
your service provider. To obtain these addresses,
contact your internet service provider.
Proxy server address
●
proxy server.
Proxy port number
●
the proxy server.

WLAN internet access points

Press , and select Tools
Connection Destinations
>
and follow the instructions on the screen. Or, open one
of the access point groups, select an access point
marked with , and select Edit.
Follow the instructions from your WLAN service
provider.
WLAN network name
●
Search for networks. If you select an existing
network, WLAN network mode
security mode are determined by the settings of its
access point device.
Network status — Define whether the network
●
name is displayed.
WLAN network mode
●
an ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is
— Enter the address of the
— Enter the port number of
Settings
> >
New access point,
>
— Select Enter manually
and WLAN
— Select Ad-hoc to create
or