The available settings vary depending on the selected
camera.
The setup settings are shooting-mode specific.
Switching between the modes does not reset the
defined settings.
The setup settings return to the default settings when
you close the camera.
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.
Video settings
To change the main settings, in the video mode, select
Options
Settings
and from the following:
>
Video quality
— Set the quality of the video clip.
●
Select Sharing, if you want to send the video clip
using a multimedia message. The clip is recorded
with QCIF resolution, in 3GPP format, and the size is
limited to 300 kB (approximately 30 seconds). You
may not be able to send video clips saved in the
MPEG-4 format in a multimedia message.
Record location
— To add GPS location coordinates
●
to each file, select On. Receiving the GPS signal may
take time or the signal may not be available.
"Location information", p. 64.
Video stabilisation
●
camera shaking when recording a video.
See
— Reduce the effects of the
Audio recording
— Select whether to record
●
sound.
Add to album
— Add the recorded video clip to an
●
album in Photos.
Show captured video
●
frame of the recorded video clip after the recording
stops. To view the entire video clip, select
the active toolbar (main camera) or
Play
(secondary camera).
Default video name
●
captured video clips.
Memory in use
— Select where you want to store
●
your video clips.
Restore camera settings
●
settings to default values.
— Select to view the first
Play
Options
>
— Enter the default name for
— Restore the camera
from
71