Medistrom Pilot-12 Lite Manual Del Usuario página 6

4. Green Charge Level Indicator Lights
When the battery is being charged, the lights will blink, and then shine solid green
showing the level of charge going from Lo to Hi. Refer to Section 8 for a guide to charge
levels.
5. LED Flashlight
Can be turned ON and OFF by holding the Multi Function Button for 3 seconds.
Note: If the Pilot Lite battery is not connected to a device, the flashlight will turn OFF
automatically after 10 minutes, otherwise, the flash light will remain ON.
6. USB Port (5V 2.5A Out)
Can be used to charge handheld devices (please check that the output Voltage and
Amperage is compatible with the device that needs charging via the USB before
connecting). Once connected press the Multi Function Button to turn on the battery.
7. DC Out Port
This port is used to connect a compatible PAP device to the battery by using the
matching DC output cable.
NOTE: No power adapters are included with your Pilot-12 Lite Battery and Backup
Power Supply. Refer to section 1.2 (PAP Device Compatibility)
Using Pilot-12 Lite as a Backup Power Supply for PAP devices
STEP 1 – Connecting Pilot-12 Lite to AC Power Adapter
6
Section 1.6 Pilot-12 Lite Setup
Plug the power connector from the
Phillips Respironics
System One S60 AC adapter into the
Charge Port of the Pilot-12 Lite and
plug the other end into the power
outlet.
NOTE: Please use the Short Charging
Adapter Cable for the DeVilbiss
IntelliPAP I, HDM Z1 series devices
(sold separately SKU# P12MXDPLK)
DreamStation/