Rear Panel Layout
1.
XLR and ¼" Input Connector (Input 1) - This
combo XLR and ¼" connector accepts either
a balanced or unbalanced microphone or line
level signal. The ¼" phone input accepts TS
or TRS type connectors.
2.
VOL Control (Input 1) - This Volume knob
adjusts the level of the Input 1 channel.
3.
SIGNAL Indicator (Input 1) - This GREEN LED
indicator, when illuminated, indicates that the
signal is present at the Input 1, regardless of
the Input 1 VOL Control setting.
4.
Mic/Line Switch (Input 1) - The MIC position
changes the gain of the Input 1 jacks to MIC
level. The LINE position reduces the gain of
both jacks by 30dB to line level.
5.
XLR and ¼" Input Connector (Input 2) - This
combo XLR and ¼" connector accepts either
a balanced or unbalanced line level signal.
The ¼" phone input accepts TS or TRS type
connectors.
6.
VOL Control (Input 2) - This control adjusts the
level of the Input 2 channel.
7.
SIGNAL Indicator (Input 2) - This GREEN LED
indicator, when illuminated, indicates that the
signal is present at the Input 2, regardless of
the Input 2 VOL Control setting.
8.
Master VOL Control - This control adjusts the
overall signal level at the input of the power
amplifiers.
9.
EQ Switch - The Auro DSP has three EQ
contour curves: FLAT, DEEP, and BOOST.
The FLAT setting produces the standard
frequency response and works best for most
applications. The BOOST setting provides a
high frequency lift for vocal clarity. This is
useful when plugging a microphone directly
into the speaker. The DEEP setting enhances
low frequencies to add punch and high
frequencies to add vocal clarity.
Auro X12D/X15D
9