Treadmill Start Description - SPORTSTECH F50 Manual De Instrucciones

VII. TREADMILL START DESCRIPTION
Start method:
1. Operate Start on the screen (or the Start on the keyboard), countdown of 3s will show in the middle of the
screen with voice hint of "Start" countdown of 3s, then treadmill motor starts.
2. Operate Speed+ on the screen to increase the speed of treadmill of up to 24.8KM;
3. Operate Speed- on the screen to decrease the speed to a minimum of 0.8KM;
4. Operate Speed+ and Speed- on the keyboard, with the same functions as the above;
5. Operate Raise and Fall on the screen to increase the raise slope to a maximum of section 20;
6. Operate Raise and Fall on the screen to lower raise slope of the treadmill to a minimum of section 0
7. Operate Start on the screen, with the functions same to that said above in 5 and 6.
8. When the treadmill is running, operate Stop on the screen (or Stop on the keyboard) to stop the treadmill motor.
Safety lock:
In any state, pull the Safety lock for emergency stop of the treadmill, you will see "Safety Lock" falls off, please check
on the screen, with Safety lock electronic table reset to enter into the home screen.
100