Battery Replacement; Measurement Specifications; General Specifications - Urrea UD333 Manual De Usuario

E N G L I S H
This Meter should be calibrated
annually. Regarding the service/
calibration information on this Meter,
contact the nearest distributor of this
Meter.
WARNING: TO AVOID ELECTRIC
SHOCK, REPAIRS OR SERVICING NOT
COVERED IN THIS MANUAL SHOULD
ONLY BE PERFORMED BY QUALIFIED
PERSONNEL. WHEN SERVICING THIS
METER, USE ONLY THE SPECIFIED
REPLACEABLE PARTS.

BATTERY REPLACEMENT

The Meter uses a 9 V battery (NEDA
1604 or 6LR61). To replace the
battery, remove the screw of the
battery compartment from the
back of the Meter and lift off the
cover, on the compartment. Replace
the battery. Re-attach the battery
compartment cover the back of the
Meter and reinstall the screw.
6. SPECIFICATIONS
MEASUREMENT
SPECIFICATIONS
Accuracy is given as ± ([ % of reading ]
+ [number of least significant digits])
from 18 °C to 28 °C with relative
humidity up to 80%, for a period
of one year after calibration. AC
conversions of this Meter are average
responding and calibrated to the RMS
value of a sine wave input.
14
Function
Range Resolution
200 A 0,1 A 1,5%+5 dgts
600 A 1 A
Function
Range Resolution
200 V 0,1 V 0,5%+5 dgts
600 V 1 V
Function
Range Resolution
200 Ω 0,1 Ω 1,5% + 5 dgts
Function
Open circuit voltage test: <1,2 V
Threshold: Approx. <15 Ω
Overload protection
Function
Range Resolution
2 kHz 1 Hz 1% + 5 dgts
* This accuracy is guaranteed for 45Hz to 1.2kHz
only..

GENERAL SPECIFICATIONS

Maximum voltage between any
terminal and ground: 600 V RMS.
Digital Display:
2000 counts, 3 updates per second.
Storage temperature:
-20 °C to 60 °C (-4 °F to 140 °F).
Operating Temperature:
AC Current
(45 Hz to 400 Hz)
Overload
Accuracy
protection
600 A
2%+5 dgts CONTINUOS
AC Voltage
(45 Hz to 400 Hz)
Overload
Accuracy
protection
600 V RMS
1%+5 dgts
Resistance
Overload
Accuracy
protection
600 V
Continuity
600 V
Frequency
Overload
Accuracy
protection
600 V