Technical Specifications; Safety - PLYMOVENT T-FLEX/CW Manual Del Usuario

F
E
D
C
Fig. 2.1: Main components and elements
2.2 Operation
The extracted welding fume enters the extraction arm via the
rotatable hood. The arm discharges the polluted air to a filter
unit or directly to the atmosphere. The hood of the arm is fitted
with a throttle valve, which can be controlled using the rotary
knob(s). The throttle valve is mostly used when several
extraction arms are integrated in a line installation; in such
configurations closing the throttle valve prevents the loss of
costly heated air.
3

SAFETY

General
The manufacturer does not accept any liability for damage to
the product or personal injury caused by ignoring of the safety
instructions in this manual, or by negligence during installation,
use, maintenance, and repair of the product mentioned on the
cover of this document and any corresponding accessories.
Specific working conditions or used accessories may require
additional safety instructions. Immediately contact your
supplier if you detect a potential danger when using the product.
0507291010/260411/A T-Flex/CW
The user of the product is always fully responsible for
observing the local safety instructions and
regulations. Observe all applicable safety instructions
A
and regulations.
User manual
- Everyone working on or with the product, must be familiar
B
with the contents of this manual and must strictly observe the
instructions therein. The management should instruct the
personnel in accordance with the manual and observe all
instructions and directions given.
- Never change the order of the steps to perform.
- Always keep the manual with the product.
Users
- The use of this product is exclusively reserved to well
G
authorised, trained and qualified users. Temporary personnel
and personnel in training can only use the product under
supervision and responsibility of skilled engineers.
- Use common sense. Stay alert and keep your attention to your
work. Do not use the product when you are under the
influence of drugs, alcohol or medicine.
- The product is not to be used by children or persons with
H
reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction.
I
- Children must be supervised not to play with the product.
1
Intended use
The product has been designed exclusively for extracting gases
and particles which are released during the most commom
welding processes. Using the product for other purposes is
considered contrary to its intended use. The manufacturer
accepts no liability for any damage or injury resulting from such
use. The product has been built in accordance with state-of-the-
art standards and recognised safety regulations. Only use this
product when in technically perfect condition in accordance with
its intended use and the instructions explained in the user
manual.

Technical specifications

The specifications given in this manual must not be altered.
Modifications
Modification of (parts of) the product is not allowed.
Product combinations
If the product is used in combination with other products or
machines, the safety instructions in the documentation of these
products also apply.
WARNING!
Fire hazard! Never use the product for:
- extracting flammable, glowing or burning particles
or solids or liquids
- extracting of aggressive fumes (such as hydrochloric
acid) or sharp particles
- extracting dust particles which are released when
welding surfaces treated with primer
- sucking cigarettes, cigars, oiled tissues, and other
burning particles, objects, and acids
1. "Intended use" as explained in EN-ISO 12100-1 is the use for which the technical
product is suited as specified by the manufacturer, inclusive of his directions in
the sales brochure. In case of doubt it is the use which can be deduced from the
construction, the model and the function of the technical product which is
considered normal use. Operating the machine within the limits of its intended
use also involves observing the instructions in the user manual.
EN - 9