Secure The Alarm Assembly To The Support Plate; Install The Batteries; Install The Batteries Into The Battery Tray - Schlage Sense Guia De Instalacion

9d Secure the Alarm Assembly to the Support Plate.
Install the lower screw first.
Actual Size
8-32 x 1Z\,"
Please do not rotate the thumbturn at this time. It may not rotate
easily. Setup will be performed after installation is complete.
10

Install the Batteries.

10a Install the batteries into the battery tray.
1. Unsnap the connector.
2. Remove the battery tray.
3. Install four high-quality alkaline AA
batteries.
»
Lithium batteries may cause
undesirable operation.
4. Carefully replace the battery tray, with the
batteries facing the door.
5. Snap the connector back into place.
NOTE
ELECTROSTATIC DISCHARGE
WARNING!
Touching the circuit board
may damage the lock!
Actual Size
8-32 x .187 UP
FHMS
11