Items Supplied; Proper Use; Technical Data - EINHELL GC-BC 52 I AS Manual De Instrucciones Original

22. Carrier plate
23. Pressure plate
24. Pressure plate cover
25. Nut M10 (left-hand thread)
26. Oil/petrol mixing bottle
27. Spark plug wrench
28. 3x cable tie
29. Allen key 4 mm
30. Allen key 5 mm

2.2 Items supplied

Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Petrol scythe mower
•
Guide pin
•
Operating handle
•
Operating handle retainer
•
Carrying strap
•
Trimming blade
•
Spool with nylon line
•
Driving plate
•
Pressure plate
•
Pressure plate cover
•
Nut M10 (left-hand thread)
•
Combined oil/petrol cylinder
•
Spark plug wrench
•
Allen wrench 4 mm
•
Allen wrench 5 mm
•
3 ea. tie wraps
•
Knurled screw M6
•
Protective hood for nylon line/trimming blade
•
Original operating instructions
Anl_SA_GC_BC_52_I_AS_SPK8.indb 26 Anl_SA_GC_BC_52_I_AS_SPK8.indb 26
GB

3. Proper use

The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds
and undergrowth. The power trimmer (using the
line spool with cutting line) is designed for cutting
lawns, grassed areas and small weeds. The ope-
rating instructions as supplied by the manufactu-
rer must be obeyed to ensure that the equipment
is used properly. Any use which is not expressly
permitted in the manual may result in damage
to the equipment and place the user in serious
danger. Be sure to observe the restrictions in the
safety instructions.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.

4. Technical data

See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method.
It may change according to how the equipment
is used and may exceed the specifi ed value in
exceptional circumstances.
The specifi ed vibration value can be used to com-
pare the equipment with other power tools.
- 26 -
11.01.2017 09:16:24 11.01.2017 09:16:24