Grant Optima TX150 Manual Del Operador página 24

Segment 01
Target temperature
Pump speed
Duration (hh:mm)
Action
Relay Off
Segment 01
Target temperature
Pump speed
Duration (hh:mm)
Action
Relay Off
Segment 01
Target temperature
Pump speed
Duration (hh:mm)
Action
Relay Off
Program
001: Ends 00:10
30424 V6
Page 23
6. Rotate the dial to highlight pump speed, press S
°c
 
. to select
  7. Rotate the dial to the desired pump speed (1 to 5).
.
Press S to set.
 
:
Save
8. Rotate the dial to highlight duration, press S to
°c
 
select.
.
  9. Rotate the dial to define the duration of the first
.
segment (hh:mm). Minimum segment duration is
1 minute, maximum 99 hrs 59 mins. Press S to
  set.
:
Save
10. Rotate the dial to highlight action, press S to
°c
 
select.
.
 
11. Rotate the dial to toggle between relay on/off.
.
Press S to select.
  12. Highlight save to store segment 1.
:
Save
The program screen is displayed.
13. To insert a new segment, highlight segment 1,
°c
 
press S. Rotate the dial to display insert after,
.
press S to select.
Insert after
Segment 2 screen is displayed. Repeat steps 4 to
12 to create a new segment.
To dwell for a period at a particular temperature,
set the temperature to the same value as the
previous segment and then set the time to the
required dwell period.
14. On completion of programming, press F twice to
return to the home screen.
www.grantinstruments.com
TX150 & TXF200
Operating Manual