Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Technical specifications
Chain sharpener ..................... KSG 220
Nominal input voltage ....... 230 V~, 50 Hz
Power consumption .......................220 W
Safety class .......................................
Mechanical rating ............................ IP 20
Motor speed.............................7500 min
Disk speed ................................... 42 m/s*
Adjustment angle .................. 35° left/right
Grinding disc dimensions
......................100 mm x 10 mm x 4,5 mm
Weight ........................................ 1,65 kg
Sound power level, measured
(L
) .................... 91,7 dB (A) K
wA
Sound pressure level
(L
) .....................78,7 dB (A), K
pA
Vibration (a
) .......2,753 m/s
h
* The grinding disk must be able to with-
stand a circulation speed of 42 m/s.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under actu-
al usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
130
II
-1
=3,0 dB
wA
=3,0 dB
pA
; K
=1,5 m/s
2
2
h
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
Publicidad
Capítulos
Tabla de contenido
