Accessories; Available Accessories - Ferroli FCM 400 Manual De Instalación

AVAILABLE ACCESSORIES

The following accessories are available for this category:
- Control and Monitoring Panels REM W1
A set of panels is available for remote wall installation formed by three different types of control: commutator, basic
thermostat and evolved thermostat .
- 3-way valve (obligatory for operation in the cooling mode)
The three-way valve is not only required to control the ambient temperature, but also to block the flow of chilled
water to the coil if the level of condensed water in the tray should rise in an abnormal way .
It is obligatory to install this valve if the unit is used for operation in the Cooling mode during summer as this stops
it from cooling too much during the periods when the fan remains at a standstill, thus preventing the unpleasant
formation of condensation on the casing of the machine .
- Bacinella raccolta condensa BC
Questo accessorio, realizzato in materiale plastico, raccoglie la condensa che si forma sulle connessioni idrauli-
che non coibentate e sul kit valvole (se presente), in regime di funzionamento estivo (accessorio consigliato per
applicazioni in raffreddamento) .
Tabella compatibilità accessori .
Unit
400
600
850
1500
400-4
750-4
MAIN BATTERY
CONTROL
Rem W1
Rem W1
Rem W1
Rem W1
Rem W1
Rem W1

ACCESSORIES

HEATING BATTERY
KIT VALVE
VTV1
VTV2
VTV2
VTV2
VTV1
VTV3
KIT VALVE
\
\
\
\
VTV4
VTV5
DRIP TRAY
BC1
BC2
BC2
BC2
BC1
BC2
7