Technical Details - entrematic Ditec OLLYC Manual De Instalación

1.

TECHNICAL DETAILS

Max load
Dimensions
Max run
Temperature
2. REFERENCE TO ILLUSTRATIONS
[1] Actuator
[2] Radar
[6] Transmission
[8] Belt
3. INSTALLATION
in millimetres (mm).
Attention: reposition the components correctly inside the case
after cutting. The transmission pulley [6] and the gearmotor pulley
[5] must be behind the heads. Suitably tension the belt [8].
Attention: if the thickness of the door is different from 40 mm,
use suitable spacers that are not supplied.
Attention: the door wing connection brackets for double door auto-
Attention: open the door wing completely and check that the
connection bracket [7] does not hit against the pulley.
OLLYC
0.2 A
24 V= / 0.3 A
30 N
0.4 m/s
0.2 m/s
IP20
-
manual.
12
OLLYC J
0.4 A
24 V= / 0.3 A
30 N
0.4 m/s
0.2 m/s
IP20
-
-
-
-