Operating Positions - EGO LM2000 Manual De Operación

adJUsTING THe FOLdaBLe HaNdLe
WARNING: Do not attempt to start the mower until the handle has been
locked at one of the two preset operating positions.
1. lOCKeD StOrage pOSitiOn: Your mower is shipped with the handle in
the compact, locked position (Fig. 5).
2. graSS Bag attaCHment/remOVal pOSitiOn:
press and hold the quick-adjust lever with your right hand to release the
handle from the locked storage position. Begin to lift the handle from its
folded position with your left hand, and then release the lever (Fig. 5).
gently pivot the handle upward until you hear and feel the lock pin engage
in the first position (Fig. 6.) this position allows easy access to install and
remove the grass bag.

OperaTING pOsITIONs

NOTE: the motor cannot be started unless:
a) the side rails are fully extended
b) both green handle-locking clamps are securely closed
c) the handle is locked into one of the operating positions
3. upper Operating pOSitiOn: lift the handle with your left hand. gently
pivot the handle backward until you hear and feel the lock pin engage in
the upper Operating position. Fully extend the side rails and securely close
the two handle-locking clamps (Fig. 7 & 8). taller users may prefer this
position.
4. lOWer Operating pOSitiOn: press and hold the quick-adjust lever with
your left hand to release the handle from the upper operating position.
Begin to lower the handle with your right hand, and then release the lever.
gently pivot the handle downward until you hear and feel the lock pin
engage in the lower Operating position. Fully extend the side rails and
securely close the two handle-locking clamps (Fig. 7 & 8).
5
6
locked Storage
position
7
8
56-VOlt litHium-iOn COrDleSS laWn mOWer — lm2000
press the Quick
adjust lever
grass Bag upper
attachment/removal Operating
position position
lower
Operating
position
indication
line
15