End Of Operation; Service, Maintenance And Care - diversey TASKI aquamat 10.1 Instrucciones Originales De Uso

End of operation

Notice:
Carpets should not be walked on after
brushing until they are fully dry. Where
possible, only replace the furniture once
the carpet is fully dry. Where this is not
possible, protect the furniture legs with
aluminum foil (risk of rust and stain marks).
• Switch off the machine.
• Remove the plug from the mains socket.
• Clean the main cord with a damp cloth.
Empty recovery tank
Notice:
Drain water or cleaning solution must be
disposed of in compliance with the nation-
al regulations.
Notice:
When draining the tank, the detergent sup-
plier's regulations regarding personal pro-
tective equipment must be observed.
Notice:
The tank may not be removed from the
machine while completely full.
• Empty the recovery tank into a suitable drain.
Cleaning the machine
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in operation)
• Wind up the main cord loosely.
Notice:
Never store the machine when it is still wet
from cleaning. Always allow it to dry out
before re-assembling.
This will prevent the formation of mold and
unpleasant odors.

Service, maintenance and care

The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Check the motor ventilation for dust ac-
cumulation, clean if necessary
Checking/changing the fleece dust bag ●
Clean the machine with a moist cloth
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 500 working hours
or at least once a year.
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
EN
●
●
37