Locking The Controls; Over-Temperature Protection; Detection Of Small Articles - Nbels VINSM3 Manual De Instrucciones

Cancel the Boost function
1. Touching the heating zone selection control
that you wish to cancel the boost function
2. Touching the "Boost" control
then the cooking zone will revert to its original setting.
• The cooking zone returns to 9 automatically after 5 minutes.

Locking the Controls

• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The timer indicator will show "Lo "
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock control for a while
3. You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disable except the ON/OFF
you can always turn the induction hob off with the ON/OFF control in an
emergency, but you shall unlock the hob first in the next operation

Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the
Induction hob. When an excessive temperature is monitored, the Induction hob
will stop operation automatically.

Detection of Small Articles

When an unsuitable size or non-magnetic pan (e.g. aluminum), or some other
small item (e.g. knife, fork, key) has been left on the hob, the hob automatically
go on to standby in 1 minute.
to cancel the Boost function,
13
,