Failure Display And Inspection - Nbels VINSM3 Manual De Instrucciones

The induction hob or
a cooking zone has
turned itself off
unexpectedly, a
tone sounds and an
error code is
displayed
(typically
alternating with one
or two digits in the
cooking timer
display).

Failure Display and Inspection

If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem Possible causes
E4/E5 Temperature sensor failure
E7/E8
Temperature sensor of the
IGBT failure.
E2/E3 Abnormal supply voltage
E6/E9 Bad induction hob heat
radiation
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob.
Technical fault. Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether
power
supply is normal.
Power on after the power
supply is normal.
Please restart after the
induction hob cools down.
21