Technical Data - EINHELL EX 115 Manual De Instrucciones

Anleitung EX 115 -12sprachig
GB
Description
1. Sanding disk
2. Housing
3. Lock button
4. On/Off switch
5. Dust bag socket
6. Power cable
7. Dust bag
Please read the operating instructions carefully
and observe the safety regulations at all costs.
Keep the operating instructions together with the
eccentric sander.

Technical data

Voltage:
Power rating:
Sanding surface:
Disk size:
Oscillations per minute:
Safety insulated
Sound pressure level LPA
Sound power level LWA
Vibration a w
Weight
Items enclosed
EX 115 sander
Dust bag
Important!
In the interests of your health, always use the dust bag!
Attaching the dust bag
Dust is extracted straight through the sanding disk
and backing pad into the dust bag.
6
08.11.2001 11:24 Uhr
Operating instructions
3 x sanding disks grain size 60/120/240
General safety regulations
Always remove the plug from the socket before
doing any work on the machine (cleaning,
changing sanding disks etc.).
For the sake of your health, always wear a dust
mask and goggles when sanding.
Before you begin work, make sure the workpiece
cannot slip.
It is in your own interests to keep the machine
clean at all times and to check it for damage after
each use.
If ever you discover any damage, consult the
exploded drawing and parts list to determine
exactly which replacement parts you need to
230 V ~ 50 Hz
order from our Customer Service Centre.
The noise level at the place of work may exceed
180 W
85 dB (A), in which case the user will require ear
110 mm dia.
muffs.
Vibration measured in the handle according ISO
115 dia.
5349.
10,000
Maintenance
73 dB(A)
Keep the eccentric sander clean at all times.
Never use any caustic agents to clean the plastic
83 dB(A)
parts.
6 m/s 2
Check the carbon brushes in the event of
1,7 kg excessive sparking.
If ever you discover any damage, consult the
exploded drawing and parts list to determine
exactly which replacement parts you need to
order from our Customer Service Centre.
Seite 6