Gabarron RX4P Instrucciones De Instalacion Y Uso página 13


SUN, MOON AND TEMPERATURES
The electronic programmer is able to handle three temperature levels during the 24h of the day.
Press the key to set the SUN temperature. The display will show the SUN temperature value blinking.
Set the SUN temperature value by means of the
in frost protection mode. Press the
in the display) and vice versa.
Repeat the above steps with the key

The temperature level is 3ºC and it is a fix value. This temperature level can be used as off selection when setting the temperatures during
curtain times of the day.

SUN, MOON, or temperatures can be allocated to any of the 48 intervals of 30 minutes of the day.
DAILY PROGRAMMES
It is basic to visualize the day split into 48 intervals of 30 minutes each; SUN, MOON, or
The default settings include daily mode so that the heater will repeat the program every day. If different programmes are required along a week,
please see the next step WEEKLY PROGRAMMES. To check a programme or to make a new one follow these steps:
PRG
Press the key and the display will show
OFF (frost protection) from 00:00h to 00:30h. If SUN or MOON temperatures are selected the relevant luminous indicator will be lit. If OFF

temperature is selected both luminous indicators will be off.
+
Press the key to go to the next interval. The display will show
to allocate SUN, MOON or OFF (frost protection) from 00:30h to 01:00h or press
Repeat these steps allocating the desired temperatures levels over the 24 hours of the day. Press the
23:30
period. By reaching the
PRG
At any time key can be use also to store the program and return the previous mode.
SUN
MOON

OFF
00:00 01:00 02:00 03:00
EXAMPLE
Let's see an example of how to introduce a
program with the above distribution of
temperatures.
OFF from 24:00h to 7:30h in the morning.
The heater will be on only if the temperature
drops to 3ºC.
SUN temperature from 7:30h to 9:00h.
MOON temperature from 9:00h to 13:00h.
SUN temperature from 13:00h to 15:00h.
MOON temperature from 15:00h to 19:30h.
SUN temperature from 19:30h to 24:00h.
–
+
o keys and press the

key to shift from frost protection mode (time is shown in the display) to standard mode (temperature is shown
to set the MOON temperature.
00:00
intermittently. Press one of the three keys
+
in the display and pressing
04:00 05:00 06:00 07:00 08:00 09:00
1 - Press
2 - Press
3 - Press
4 - Repeat steps 2 and 3 until display shows:
5 - Press
6 - Press
7 - Press
8 - Press
9 - Press
10 - Press
11 - Press
12 - Press
13 - Repeat steps 11 and 12 until display shows:
14 - Press
15 - Press
16 - Repeat steps 14 and 15 until display shows:
17 - Press
18 - Press
19 - Repeat steps 17 and 18 until display shows:
20 - Press
21 - Press
22 - Repeat steps 20 and 21 until display shows:
23 - Press
24 - Press
key to store the value. If the display shows the time the heater is

temperatures can be allocated to any of them.
00:30
intermittently and, again, press one of the three keys
+
key directly if the existing temperature level is ok.
key the controller will store the program and will return to the previous mode.
10:00 11:00 12:00 13:00 14:00 15:00
PRG

+
key
+
key
+
key
+
key
+
key
+
key
+
key
+
key
+
key
13

to allocate SUN, MOON or
–
key at any time to modify a previous
16:00 17:00 18:00 19:00 20:00 21:00
00:00
00:30
07:30
08:00
08:30
09:00
09:30
13:00
13:30
15:00
15:30
19:30
20:00
23:30
GRAB

22:00 23:00 24:00
Off
On