Cleaning - Allmatic NC8 Serie Manual De Instrucciones

ALLMATIC
10

Cleaning

CAUTION
Flying swarf and cooling emulsion.
Injuries to eyes.
Ø Wear safety goggles when cleaning with compressed air.
Wear safety goggles!
Use brushes, chip extractor or chip removing hook to clean the NC8.
After long periods of use, we recommend dismantling the NC8, cleaning it thoroughly and oiling
it.
1
2
6
5
Fig. 27: Disassembly
1. Remove travel limiter (1, 2).
2. Undo screws of the spindle (4) and turn out spindle (6).
NC8 Series
3
4
Cleaning | 10
EN
71 / 410