Power Cord - Kenmore 116.31200 Manual De Uso Y Cuidado

_CAUTION
Moving parts! To reduce the risk of personal injury,
DO NOT touch the agitator when vacuum cleaner is
on. Contacting the agitator while it is rotating can
cut, bruise or cause other injuries. Always turn off
and unplug from electrical outlet before servicing.
Use caution when operating near children.
\
POWER CORD
1. Turn the quick
release upper
cord hook to
either side and
down to release
the power cord.
_WARNING
To reduce the risk of electric shock,
this vacuum cleaner has a polarized
plug (one blade is wider than the
other).
The plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified
technician to install the proper outlet.
Do not change the plug in any way.
2. Detach the
power cord plug
from the power
cord and pull the
cord off the
quick release
upper cord hook.
3. Be sure the power cord is locked into
the locking notch of the upper cord hook.
This wilt help manage the cord when
operating unit
i
4. Plug the polarized power cord into a
120 Volt outlet located near the floor.
_WARNING
Personal Injury and Product Damage
Hazard
* When any abnormality/failure occurs,
stop using the product immediately
and disconnect the power ptug.
DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
5. To restore cord, after use turn upper
cord hook to the up position, then wrap
cord loosely around quick release cord
upper hook and carrying handle.
WARNING
Electrical Shock And Personal Injury Hazard
Wrapping the cord too tightly puts stress on
the cord and can cause cord damage. A
damaged cord is an electrical shock hazard
and could cause personal injury or damage.
- 10 -