Designated Use; Technical Data - Abicor Binzel PP Plus 36D Instructivo De Servicio

PP Plus 36D/401D

1 Designated Use

2 Technical Data

Ambient temperature of welding
Transport and storage
Relative humidity
Control device rating
Tab. 1
General Data
Type of voltage
Polarity of the electrode
Wire types
Type of use
Voltage rating
Protection type of the machine-side connections
Shielding gas (DIN EN ISO 14175)
Tab. 2 General torch data according to EN 60 974-7
Type Type of Load*
cooling
CO
PP Plus
36D air 300
240D liquid 270
401D liquid 400
Tab. 3 Product-specific torch data as laid out in EN 60974-7 PP Plus
The PP Plus hand-held welding torches are used for welding of standard wire
electrodes. They conform to EN 60 974-7 and are not considered devices
having their own functions. Arc welding can only be carried out in connection
with a welding power supply. These operating instructions only describe PP Plus
welding torches. PP Plus welding torches may only be operated using original
ABICOR BINZEL spare parts.
Duty
cycle
M21
2
A A %
270 60
240 100
350 100
*For pulse arc welding, the load data are reduced by up to 35%.
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up to 90 % at 20 °C
1 A AC / 250 V AC
DC direct voltage
Usually positive
commercially available round wires
manual
113 V peak value
IP2X , IP3X (EN 60 529)
CO
2
Wire ø Gas flow rate Cooling data
mm l/min
0,8 - 1,2 10 - 20
0,8 - 1,2 10 - 20
0,8 - 1,6 10 - 20
1 Designated Use
and mixed gas M21
Flow Flow Flow pressure
temp.
max. min. min.
°C l/min bar
50 1 1,5
50 1 1,5
max.
bar
3,5
3,5
EN - 3