Data Export; Data Export Over Sd Card; Ordering Software; Accessories - Resol DL2 Manual De Instrucciones

There should then be a folder structure called RESOL/DL2 on the SD card, con-
taining the firmware file.
Î Remove the SD card from the PC and insert it into the SD card slot of the DL2.
The firmware update is being run and the DL2 automatically reboots. This may take
a few minutes. The operating control LED starts flashing, lights up for a while and
then all LEDs go out.
Î Wait until the operating control LED is permanently green.
9

Data export

There are 2 different ways to export logged data from the DL2 Datalogger:
1. Export logged data onto an SD memory card. The data are stored as a VBus
format file and can be read out on a computer using the RESOL ServiceCenter
software.
2. Export logged data onto a computer over the Web interface. Different file
formats can be selected.
Information about exporting data over the Web interface can be found in the
detailed manual on the CD included.
9.1

Data export over SD card

In order to copy data onto an SD card, proceed as follows:
Î Insert the SD card into the SD card slot
The operating control LED flashes (green):
The card has been recognised and data are being transferred.
The operating control LED is permanently green:
The transfer is completed. The card can be removed.
10

Ordering software

For an expense allowance of EUR 20,-, a DVD containing the source code and the
compiler scripts of the Open Source applications and -libraries can be ordered.
Please send your order to:
RESOL – Elektronische Regelungen GmbH
Heiskampstraße 10
45527 Hattingen
GERMANY
Please name the version number of the firmware in your order. It can be found in
the Web interface, main menu About, sub-menu General, bottom area (e. g.: „1.0
®
(200805241128)"). Per order, only one version number can be named.
11

Accessories

MicroSD card incl. adapter
Art. no.: 112 121 86
12

Spare parts

VBus cable
®
Art. no.: 112 091 98
23