Ggio1 - Generic Process I/O - MR TAPCON 260 Instrucciones De Servicio

9 Protocolo del centro de control
Attribute Na- Attribute
me Type
BndWid ASG
CtlDlTmms
LDCR ASG
LDCX ASG
BlkLV ASG
LimLodA ASG
LDC SPG
TmDlChr SPG
LDCZ SPG
TapBlkR
TapBlkL
Tabla 35: ATCC class (ATCC1)
Attribute Na- Attribute
me Type
GGIO1
Common Logical Node Information
Mod ENC
Beh
Health
NamPlt
Controls
-
Maschinenfabrik Reinhausen 2014
Explanation
Band width voltage (as percent
of nominal voltage, FPF presu-
ING Control intentional time delay
(FPF presumed, in seconds)
Line drop voltage due to line re-
sistance component (voltage)
Line drop voltage due to line
reactance component (voltage)
Control voltage below which au-
to Lower commands blocked
(relative)
Limit Load Current (LTC Block
Load Current, percentage)
Line Drop Compensation is R
and X or Z model (0=R and X,
1=Z compensation)
Time delay linear or inverse
characteristic (0=lin., 1=inv.)
Line drop voltage due to line to-
tal impedance (percentage of
nominal voltage)
ING Tap position of Load Tap Chan-
ger where automatic Raise
commands are blocked
ING Tap position of Load Tap Chan-
ger where automatic Lower
commands are blocked
9.2.4

GGIO1 - Generic process I/O

Explanation
- -
Mode
INS Behaviour
INS Health
LPL Name plate
- -
1801003/06 ES
med)
M/O/E/C Remarks
O Unit: none
Multiplier: c
O
O Unit: V
Multiplier: none
O Unit: V
Multiplier: none
O Unit: none
Multiplier: c
O Unit: none
Multiplier: c
O
O
O Unit: none
Multiplier: c
O
O
M/O/E Remarks
-
O satus-only
M
O 1: OK; 3: no in-
ternal communi-
O
-
TAPCON® 260
-
-
-
-
-
-
-
cation
-
-
131