Charging Batteries - Skytec SPL-PA Serie Manual De Instrucciones

INFRARED REMOTE CONTROL FOR MP3 PLAYER
WIRELESS MICROPHONES
Insert 9V batteries into the wireless microphones and observe the polarity.
Connect the aerials at the rear side and turn all volume controls down. Switch the system ON and the power led
will light. Switch the microphones on and the LEDs on the mics light (momentarily). Increase the Volume knobs to
the desired position. Take care not to incur FEEDBACK from the speaker. Turn the Echo, Bass and Treble Knobs
to a position in order to have the desired sound.
HOW TO CONNECT WITH YOUR BLUETOOTH DEVICE
First turn the speaker on and press "MODE" (4) till "Bluetooth" appears in the display. Then use your mobile phone
or computer to search for a Bluetooth device. When you have found "Bluetooth" a connection can be made. An
password is not required.

CHARGING BATTERIES

Prior to use this Mobile Amplifier System the internal 12V battery need to be charged for 12 hours. If the Power-
switch is in OFF position and the System is connected to mains, the battery will be (re)charged and the Charge-Led
lights !!
Note: Pull the plug out of the mains outlet if the battery is fully charged!!
Before the device the first time is actuated, pls charge the battery at least 12 hours and max. 72 hours! Battery
should be regularly charged. For optimal battery life the battery should be charged at least 1x per month. Please
note that if you do not load within 6 weeks, the battery becomes defective !!
TROUBLESHOOTING
Check before returning this product to the dealer for a repair, if leads are well connected, switches and knobs are in
the correct position, batteries are fully charged and fuse hasn't blown.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your
local authorities or your dealer about the way to proceed. The specifications are typical. The actual values
can slightly change from one unit to the other. Specifications can be changed without prior notice.
WARRANTY CONDITIONS
The date the product leaves the importer is considered to be the date the warranty begins. Only companies
approved by Skytec are allowed to work on the equipment.
During warranty period (defective) equipment must be returned to the dealer by pre-paid mail in the original box.
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor,as he is best able to help you.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Skytec cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
1. Play/Pause
2. Next/Prev track
3. Channel-selection – and + buttons
4. Volume up/down
5. Numeric keys for track selection