HP Designjet 130/130nr Printer - Quick Reference Guide
Tell Me About the Icons on the Front Panel (continued)
...continued from previous page...
If you have a roll installed, you might also see the following combinations of
flashing icons:
Unload Roll: Unload the roll completely (you do
not need to remove the spindle).
Roll Misaligned: Unload the roll of paper and
reload it, paying special attention to its
alignment.
When on: The roll is loaded. Flashing: The Roll is empty
or there is a paper jam. Action: Load roll. When off:
There is no roll loaded.
Flashing: Paper jammed, paper stalled or carriage
stalled. Action: Clear the paper jam. See "The Problem
Is Paper is Jammed". When off: Normal.
Flashing: Hardware error. Action: Note the pattern of
squares displayed in the ink cartridge icons on the front
panel and then press the Power key. If the problem
persists, see "The Problem is there is a Hardware Error"
on page 36, or run the HP Designjet System
Maintenance utility as described in "How Do I Use HP
Designjet System Maintenance?" on page 22. When
off: Normal.
40