GE 16 Instrucción De Instalación página 15

Installation instructions
CONNECTING ENERGY SMART APPLIANCE
[_] REMOVE LABEL OVER iNTERCONNECT CABLE CONNECTOR ON ACCESS COVER
LABEL
[] CONNECT APPLIANCE TO ACM
2.1 Locate interconnect cable.
This accessory is part of ACM
kit.
2.2 Plug interconnect cable into
connector on access cover as
shown.
2.3 Plug opposite end of
interconnect cable into ACM.
2.4 Refer to ACM kit
instructions to connect ACM
to Nucleus
TM
energy
manager or Smart Meter
_] PLACE ACM
NOTE: The ACM can be placed on top, back, or side of refrigerator. ACM can also be
installed without direct contact with refrigerator (for example in adjoining cabinets). See
ACM manual for further ACM installation details.
15