SystemAir IV Smart CA Instrucciones De Instalación Y Funcionamiento página 17

Measured data at commissioning
Voltage [V]:
Current L1 [A]*:
Current L2 [A]:
Current L3 [A]:
*For single-phase fans, fill in line "Current L1 [A]"
If an airflow measurement is not possible, this value can be calculated using the following formula:
Duct cross-section [sq. ft]
Commissioning of the fan successful?
Date, installer's signature
Date, operator's signature
Please keep the completed commissioning report in a safe place. In the case of a warranty claim, this report can be
requested by Systemair.
For technical questions, please contact the technical support division of Systemair.
152020
X
Flow speed [ft/min]
Commissioning Report
Temp. of transported air [°F]:
Fan impeller speed [rpm]:
Air volume [CFM]:
Differential pressure [in. w.g.]
*Δ - Pressure between suction-side and discharge of the fan
=
Air volume [CFM]
| 17
Yes No