HoMedics UHE-WM70 Manual De Instrucciones E Información De Garantía página 8

How to Fill
CAUTION: Before filling unit with water, turn the power off and unplug the unit from the outlet.
NOTE: Always use two hands to carry the water tank.
1. Grasp tank handle with both hands and lift up from
Fig. 3
humidifier base. Remove only one tank at a time. (Fig.
3)
Fig. 4
2. Turn the tank upside down—remove the tank cap by
turning it counter-clockwise. (Fig. 4)
Fig. 5
3. Fill the water tank with clean, cool water (not cold).
We recommend using distilled water if you live in a
hard water area. (Fig. 5)
Fig. 6
4. Replace the tank cap by turning clockwise until tight.
(Fig. 6)
Fig. 7
5. Install both tanks back on the base of the unit.Make
sure the tanks are firmly seated. (Fig. 7)
NOTE: This unit uses water from one tank at a time. It will
use all the water from one tank before beginning to pull
water from the other tank.
NOTE: It is normal to have a small amount of water in the
base during and after use.
7