Safety Systems - Zhermack VIBRATOR A11 Manual De Uso Y Mantenimiento

MAINTENANCE AND USE MANUAL
The vibrator must not be used with any of its parts disassembled: before using the
vibrator make sure that all its components are properly in place.
To ensure that work is done in absolute safety always make sure that you
follow the described procedures with caution.
To provide greater clarity the numbers given in the diagrams in the following
paragraphs correspond exactly to the numbering in Chapter 3 in the "Equipment
Description" section.
To ensure optimum working reliability, Zhermack employs only top quality materials and components
for the manufacture of the steam cleaner. The equipment is also thoroughly tested before delivery.
All materials are of only the highest quality and are checked on arrival at our plant, during storage and
when they are used so as to guarantee a product that is free from damage, deterioration and/or
malfunctions.
Even if only one of the safety devices is not working proceed - as far as is possible
- as described in section 9.2 and in any case contact your Authorised Servicing
Centre.
Fig. 3: Place the cup containing the plaster or coating to
be vibrated on the rubber top.
VIBRATOR A11/A12
EN
CHAPTER 7: USING THE EQUIPMENT
WARNING

SAFETY SYSTEMS

USING THE VIBRATOR A11
7.1
7.2
7.3
1
A 1
3
Figure
105 of 176