Other Functions; Setting Remote Control Code Type; Using Different Entertainment Displays; Using The Aux Source - Pioneer AVH-P6400CD Manual De Instrucciones

Other Functions

Setting remote control code type

When the remote control operation switch is set
to , changing the remote control code type
DVD
enable to operate the Pioneer DVD player by the
supplied remote control. There are two remote
codes, code type and code type
A
When using this unit with an "XDV-P9" Multi-
DVD Player, select code .
A
When using this unit with "SDV-P7" DVD player,
select code or (depending on reception
A B
signal setting of DVD player).
Set the remote control selection switch on the
left side of the remote control to appropriate
position with a pen tip or other pointed instru-
ment .
• If you selected mode, read the following
B
procedure and change the code type into the
appropriate one.
Using different entertainment
audio displays
You can enjoy displays while listening to each
sound source. The display for this MENU is the
same regardless of which source you operate
from.
Press on the head unit
NAVI/AV
Each time you press
NAVI/AV
the display changes in the following order:
—
MOVIE SCREEN PICTURE 1

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
. IP-BUS-RCA Interconnector owner's manual.
B

Selecting AUX as the source

Press
Press
• If the auxiliary setting is not switched on,
cannot be selected. For more details, see
Switching the auxiliary setting on page 59.

Setting the AUX title

The title displayed for the
changed.
1 After you have selected
press
displayed.
2 Press 5 or ∞ to select
A.MENU
AUX MENU is displayed.
3 Press 5 or ∞ to select
.
press
on the head unit
NAME EDIT adjustment indications are dis-
played.
—
PICTURE 2
4 Press
ter type.
Press
following character type:
Alphabet
Alphabet
to select as the source.
SOURCE AUX
until appears in the display.
SOURCE AUX
source can be
AUX
as the source,
AUX
and the AUX SOURCE MENU is
A.MENU
, and press
AUX
.
NAME EDIT
.
A.MENU
to select the desired charac-
A.MENU
repeatedly to switch between the
A.MENU
(Upper case), and
Numbers
(Lower case)
Section
13
AUX
, and
—
Symbols
61
En