USRobotics 9113 Guía Breve De Instalación página 14

English
Step Three: Connect Computers to the Wireless USB Print Server
N o te : You must perform this procedure on each computer on your network
to allow printing using the print server on the Wireless
Gateway.
Windows Vista:
1. Click Windows
2. Click
Add a Printer.
3. Choose the radio button labeled
Click
Next
4. Click
The Printer That I Want Isn't Listed
5. Choose
Select a shared printer by name
location address recorded during Step Two. Click
N o te : The URL information is case-sensitive and must be entered exactly as
it is listed on the
6. If prompted, select the manufacturer and model of your printer and follow
the on-screen instructions.
7. Enter a name for the printer and click
page to verify the printer's connectivity.
8. Click to complete the setup process.
Finish
Windows XP and 2000:
1. Do one of the following:
" Windows XP: Click Windows
" Windows 2000: Click Windows
2. Click
Add a Printer.
3. Click .
Next
4. Select the radio button labeled
. Click
computer
5. Select
Connect to a printer on the Internet or on a home or office network
field, enter the
tion pages. Click
N o te : The URL information is case-sensitive and must be entered exactly as
it is listed on the
10
>
Start Control Panel
The Add Printer Wizard will start.
Printer location
The Add Printer Wizard will start.
A network printer, or a printer attached to another
.
Next
address you copied from the gateway configura-
Printer location
.
Next
Printer location
>
Hardware and Sound
Add a network, wireless or Bluetooth printer
.
, and in the URL field, enter the printer
Next
section on the gateway's Status page.
. You can choose to print a test
Next
>
Start Printers and Faxes
>
Start Settings
section on the gateway's Status page.
N
dx ADSL2+
> .
Printers
.
.
>
.
Printers
. In the URL
.