Troubleshooting - BLACK&DECKER HG1300 Manual De Instrucciones

materials and soften or melt others. Avoid overheating adjacent flammable materials
such as wood, insulation, electrical wiring jackets or plastic. Thaw only those metal pipe
sections that are fully exposed. Do not attempt to thaw pipes that are inside walls, floors,
ceilings, or otherwise enclosed. Do not attempt to thaw pipes that are wrapped in
insulation.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement parts.
WARNING:
The use of any accessory not recommended for use with this tool could
ACCESSORIES
be hazardous. Always unplug the tool before attaching or removing accessories. Do not
remove accessory tips until the tool has cooled to room temperature.
• Unit will not start.
PROBLEM
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.

TROUBLESHOOTING

• Cord not plugged in.
POSSIBLE CAUSE
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
8
• Plug tool into a working
POSSIBLE SOLUTION
outlet.
• Replace circuit fuse.
(If the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Reset circuit breaker.
(If the product repeatedly
causes the circuit breaker
to trip, discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch
replaced at Black &
Decker Service Center or
Authorized Servicer.