Troubleshooting - BLACK&DECKER BDPG700 Manual De Instrucciones

• Unit will not start.
PROBLEM
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
Recommended accessories for use with your tool are available from your local dealer or
ACCESSORIES
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
The use of any accessory not recommended for use with this tool could
be hazardous.
WARNING:
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
MAINTENANCE
tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement parts.
All Black & Decker Service Centers are staffed with trained personnel to provide
SERVICE INFORMATION
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under

TROUBLESHOOTING

• Cord not plugged in.
POSSIBLE CAUSE
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• Plug tool into a working outlet.
POSSIBLE SOLUTION
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a BLACK & DECKER
service center or authorized
servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a BLACK
& DECKER service center or
authorized servicer.)
• Have cord or switch replaced
at a BLACK & DECKER Service
Center or Authorized Servicer
9