Configuring Your Computer's Network Adapter To Use Security - Belkin F5D9630-4 Manual Del Usuario

Manually Configuring your Router Manually Configuring your Router
4. Enter the IP address of the radius server into the "Radius Server" fields.
5. Enter the radius key into the "Radius Key" field.
6. Enter the key interval. Key interval is how often the keys are distributed
(in packets).
7. Click "Apply Changes" to finish. You must now set all clients to match
these settings.
IMPORTANT: Make sure your wireless computers are updated to work
with WPA2 and have the correct settings to get proper connection to the
Router.
Configuring your Computer's Network Adapter to
Use Security
Note:
This section provides information on how to configure network
adapter in your computers to use security. At this point, you
should already have your Wireless Router or access point set to
use WPA2 or WPA or WEP. In order for you to gain a wireless
connection, you will need to set your wireless notebook card
and wireless desktop card to use the same security settings.
Belkin G+ MIMO Network Cards feature easy-to-use Wireless
Networking Utility. Simply click on your wireless network name (SSID)
from the Available Networks list and enter your Pre-Share Key (PSK).
For more information please refer to Belkin Network Card's user
manual.
Most computers can also setup to work with the Router from Wireless
Network Properties screen build-in your Microsoft Windows operating
system. The following are two of the examples:
46 46