Safety Instructions For Road Safety; Start-Up; Attaching The Seat Cover - ULTIMATE SPEED USB 12 A1 Instrucciones De Utilización Y De Seguridad

Safety instructions for road safety / Start-up
Safety instructions for
road safety
In order not to jeopardise
road safety, observe the following
points:
· When using in vehicles, make sure that safety
devices, side airbags in particular, are not
compromised.
· If you have any question about the airbag,
read the vehicle's Owner's Manual or ask at
your local workshop.
AVOID DAMAGE TO THE
SEAT COVER!
Please ensure that you:
· connect the seat cover only to the voltage in-
dicated in the Technical Data,
· use the seat cushion only with the adapters
supplied,
· do not switch on the seat cover if it is folded
or bunched up,
· do not cause any sharp creases in the seat
cover,
· do not place any objects, e.g. suitcases or a
washing basket, on the seat cover when it is
switched on.
This can damage the seat cover.

Start-up

Attaching the seat cover

Place the seat cover on the car seat.
Pull the fastening strap
the head rest of the car seat.
Carefully attach the seat cover using fastening
straps .
7a
20 GB
of the seat cover over
7b
Note: You need not always use all of the securing
straps / . Test how best to secure the seat cover
7a 7b
onto your seat. Use the following fi gure as a guide.
In case the seat back is very wide or tall, fasten the
seat cover as shown in the second image.
7b
7a
If your vehicle has a side airbag,
take care when attaching the seat cover to only pull
the tie-down straps over the bracket of the hea-
7b
drest, and not over the top of the car seat. Other-
wise, the side airbag operation could be aff ected!
7b