3. Use
INITIAL USE AND CONFIGURATION
By default, the OCIGO is configured as follows :
1 · Language : English
2 · Displayed measurement : Alcohol concentration in
exhaled air
3 · Unit of measurement : mg/L
4 · Legal threshold : 0.25 mg/L
If you wish to change this factory setting, please refer to
the section « Connected mode ».
STANDALONE MODE
1 · Turn on your OCIGO breathalyzer (1) by pressing the
On button (3).
2 · Then follow the instructions on the screen.
3 · The device prompts you to insert a new mouthpiece
(2) into the OCIGO («insert » "mouthpiece ») and starts
up (« starting » then « wait »).
4 · The device then tells you that it is ready to take a
measurement («blow »).
5 · Blow steadily but not too hard, until the gauge is
filled and the device vibrates.
6 · - If the measurement is between 0.00 mg/L and the
legal threshold, the exact measurement is displayed
for 10 seconds.
- If the measurement is between the legal threshold
24